12V 180AH LiFePO4 Lithium Battery with H8 DIN case and smart BMS

• New Grade A prismatic cells to ensure long cycle life and good performance
• Perfect dimension for underseat installation with H8 DIN case size: 353mm x 175mm x 190mm
• Passive & active balancer integrated
• Communication with Victron devices and among batteries in parallel communication is optional
• Maximum discharging current: 200A
• Prismatic cells UL1642 & UN38.3 & ICE62619 certified, packs CE & UN38.3 & MSDS
• Series & Parallel connections are available
• OEM & ODM service are available
• Bluetooth and self-heating integrated for charging under low temperature

The battery management system (BMS) built into each battery ensures that the battery switches off in the event of under voltage or overload and automatically turns on again when the problem is resolved.

• Protection against under voltage by switching off the load
• Protection against over voltage by reducing charging current or switching off charging
• Shutdown in event of excess temperature
• Charging stopped in case of under temperature
• Passive and active balancer integrated in BMS
• Communication with Victron devices and among batteries are optional features
• Bluetooth app to monitor battery status and history
• Self-heating function for charging under low temperature

• High performance traction/storage battery
• Integrated (BMS) battery management system
• Safe lithium technology (LiFePO4)
• High cycles life time more than 3000 times @ 100% DOD
• High max continuous discharging current
• Much lighter weight compared to lead acid battery
• One to one replaceable with lead acid battery
• Low self-discharge

• Motorhomes, caravans and RV
• Photovoltaics, solar systems and renewable energies
• High performance traction/storage battery
• Fishing, electric boat motors and sonar
• Mobile power supply, camping and leisure
• Emergency power supply/UPS

• The battery must be packed and protected well during transport
• Must be transported according to UN3480/UN38.3 transportation code
• Never lift by the terminals - only by the handles
• Storage temperature: -10℃ to +30℃
• Transport with 50-60% charge
• Charge every three months during storage

• Only use for intended applications
• Do not short-circuit the battery
• Installation and maintenance by qualified specialists only
• Protect from direct sunlight and temperatures above +60°C
• Use only compatible chargers
• Disconnect devices during long storage
• Ensure proper assembly and correct polarity
• Avoid physical damage (falling, drilling, etc.)
• Keep battery dry and clean
• Capacity may vary with temperature and charge/discharge rate
• Maximum four batteries in parallel (series connection requires customized BMS)
• Bring batteries to same charge level before connecting
• Do not interconnect different battery types or manufacturers

• Secure properly to prevent movement in case of accident
• Ensure correct polarity when connecting
• Reverse connection will irreparably damage BMS electronics (not covered by warranty)